EdgeStar BWC90SS Owner'S Manual Download Page 16

12 

 

 

EdgeStar Limited Warranty 

One (1) Year Parts & Ninety (90) Days Labor

 

This product is warranted by EdgeStar to be free from defective workmanship and materials, subject to any conditions set forth as 
follows:

 

 

WHAT IS COVERED:

 

LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an 
authorized EdgeStar repair facility. At its option, EdgeStar will repair the product with new or remanufactured parts, or exchange 
the defective product with a new, refurbished, or remanufactured product. If a product is replaced, it will carry the remaining 
warranty of the original product. After the ninety (90) day period, EdgeStar will no longer be responsible for labor charges 
incurred. All defective products and parts covered by this warranty will be repaired or replaced on a mail-in basis to an EdgeStar 
authorized repair facility.

 

 

PARTS: For a period of ONE (1) YEAR from the date of original purchase, EdgeStar will supply new, rebuilt, or refurbished parts free 
of charge. EdgeStar may request a defective part be returned in exchange for the replacement part. All replacement parts or 
products will be new, remanufactured, or refurbished. All products and parts replaced by EdgeStar under warranty service 
become the property of EdgeStar.

 

 

This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of 
the product under normal service, maintenance, and usage conditions. This warranty applies to the purchase and use of this 
product in residential settings within the contiguous United States of America. 

 

 

WHAT IS NOT COVERED:

 

The following limitations apply to the coverage of this warranty. This warranty does not cover:

 

 

Labor charges for installation, setup or training to use the product.

 

 

Shipping damage, and any damage caused by improper packaging for shipment to an authorized service center, and any 
damaged caused by improper voltage or any other misuse, including abnormal service, handling, or usage.

 

 

Cosmetic damage such as scratches and dents.

 

 

Normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters, cartridges, batteries.

 

 

Service trips to deliver, pick-up, or repair, install the product, or to instruct in proper usage of the product.

 

 

Damages or operating problems resulting from misuse, abuse, operation outside environmental specifications, uses contrary to 
instructions provided in the owner’s manual, accidents, acts of God, vermin, fire, flood, improper installation, unauthorized 
service, maintenance negligence, unauthorized installation or modification, or rental or commercial use.

 

 

Labor, service transportation, and shipping charges incurred 91 days or more after the date of original purchase.

 

 

The use of EdgeStar products in commercial or rental settings.

 

 

Optional accessories, attachments, and appearance items.

 

 

Products that have been modified to perform outside of specifications without the prior written permission of

 

EdgeStar.

 

 

Products lost in shipment, or theft.

 

 

Products sold AS IS or from an unauthorized reseller.

 

 

Products that have had their serial numbers removed or defaced. Products with serial numbers that have been invalidated.

 

 

Damage to personal property from use of product. 

 

 

Replacement of repair of household fuses, circuit breakers, wiring, or plumbing.

 

 

OBTAINING WARRANTY SERVICE:

 

If you believe your product is defective, contact EdgeStar Customer Support for troubleshooting assistance and warranty service at 

www.edgestar.com

 or 1-866-319-5473. Before contacting EdgeStar, have your serial number and proof of purchase available. Once an 

EdgeStar authorized representative has confirmed that your product is defective and eligible for warranty service, the product must be 

returned to an EdgeStar repair facility. The purchaser is solely responsible for prepaying all shipping related costs to and from the repair 
facility. EdgeStar is not responsible for damage resulting from shipper mishandling or improper packaging. Do not return a defective 
product to the place of purchase. Products received without a return authorization number will be refused.

 

 

 

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION 
TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTORS SHALL BE LIABLE FOR ANY INCIDENTAL, 
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR 
ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. 

IN NO EVENT AND UNDER NO CIRCUMSTANCE OF ANY TYPE OR KIND 

SHALL THE SELLER, MANUFACTURER AND/OR DISTRIBUTOR BE LIABLE FOR ANY REASON, UNDER ANY THEORY, FOR MORE THAN THE BASIC COST OF 
THE PRODUCT TO THE PURCHASER OR END USER.

 

SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO 

THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY 
FROM STATE TO STATE.

 

 

Summary of Contents for BWC90SS

















Reviews: