7
Free-Standing Installation
A free-standing installation will allow you to install the kegerator in
almost any place you desire. Please follow the safety information
referenced on the Important Safety Information page in this manual.
Top Cover Installation
The included stainless steel top cover is an optional accessory for
use with your kegerator. The purpose of the top cover is to add a
layer of protection from scratches to the main cabinet. The top
cover will use the four installation pegs to hold into place.
1. Place the cover on the top of the cabinet.
2. Align the hole openings of the top cover to that of the
cabinet.
3. Twist in the four installation pegs on the outer edges of the
cover until tight.
Guard Rail
The guard rail helps to hold glasses on the top of the cabinet in
order to avoid spills or broken glass.
1.
Insert the four installation pegs on the outer edges of the top
of cabinet.
These may already be in place if you have
installed the top cover.
2. Place the guard rail onto the four installation pegs. You may
need to push down on the guard rail to ensure the rail has
clicked into place on the pegs.
3. Screw the four small guard rail screws into the guard rail.
This will lock the rail into position.
Drip Tray
The drip tray is a reservoir to collect any runoff liquid from overfilled
glasses, leaking faucets, or spills. There are two pieces included
for this tray. Place it on top of the cabinet and position under the
faucet.
Important Note:
• Please refer to the dispense
kit installation guide to
complete the full assembly of
the kegerator.
