EdgeStar BR2000BL Owner'S Manual Download Page 5

4

 

 

 

 

If you purchased your EdgeStar Refrigerator as a Draft Beer Dispenser, it is supplied 
with all the accessories you need to install and tap a standard American Sankey Tap ½ 
barrel keg. This unit can also fit ¼ barrel, 1/6 barrel, and Cornelius kegs with standard 
American Sankey Tap connections. 
 
All you need to do is set up the Draft Beer Dispenser, supply the full keg of beer,                                                                                                                                         
and fill the CO

tank. 

 

 

 
 
 

Suggested optional accessories: 
Beer Dispenser Cleaning Kit 
Different types of taps and regulators 
And more! 
 
For more information on compatible accessories, feel free to email 

[email protected]

 or call toll-free 866-319-5473.

 

 

 

 
 

 

  To guarantee that your Refrigerator / Draft Beer 

Dispenser will last for years to come, install it in a 
location where there is proper air circulation and 
electrical connections.   

  Keep the refrigerator away from heat and direct 

sunlight. 

  This refrigerator is designed for indoor use only and 

should not be used outdoors. 

  This refrigerator should not be placed in a built-in or 

recessed area. It is designed to be freestanding. 

  The following dimensions are the recommended 

clearances around the beer dispenser. 

 

 

 

 

                

Sides------------2 to 3” (76 mm) 

 

 

Back---------------4 to 5” (127 mm) 

 

 

UNPACKING ACCESSORIES AND INVENTORY 

Proper Location

 

 
 
 
NOTE: This 
appliance is 
designed for 
“indoor” use 
only and 
should not be 
used outdoors  

Additional Accessories 

 

Summary of Contents for BR2000BL



















Reviews: