JRP Edge Digital Gauge: EGT & Boost + EGT
Page 3 of 5
Manual - EGT + Boost & EGT
Introducing
•
Colour Pre-warn (CPW) is a new innovation developed first in the world by Just Race Parts.
The new Version 1.5v - Edge series
temperature gauges, now have a two stage warning system. One which works the same as old/ competitor gauges where you
set a warning value that can trigger an alarm on the gauge.
Now with the CPW feature enabled; the gauge will change
display colours leading up to your set warning alarm.
You can set custom colours as well as the pre-set adjustable number increments.
See example below:
Blue
is your “day mode” running colour,
500c
is your warning alarm trigger value
20
is your temperature
control increment.
Temperature above
440 display colour
change to:
(Yellow default)
Temperature above
460 display colour
change to:
(Orange default)
Temperature above
480 display colour
change to:
(Red default)
Temperature below
440 display colour
says to:
(Mode set colour)
Temperature above 500
display warning
⚠
sound
buzzer alarm
•
While the gauge is running it will record peak data values coming in from all sensors connected to the gauge. The value that’
s
displayed in the peak menu is what is shown in the centre numerical screen.
Say for example you’re running “Boost PSI & EGT
-
display mode” (TY3). It will display the Boost peak (As that’s what’s displayed
in
the centre numerical screen). The peak EGT value will still be recorded and saved - (equally the alarms for EGT Temperatures will
still trigger). But you won’t be able to see EGT peak values in display mode (TY3).
You can however change the display mode to EGT only (TY4) and then check the peak value from there. Clear or leave the
value recorded then change back to display mode TY3 to bring the boost display back.
New
Peak Value/ Combo Gauges
•
To enable this feature navigate to temperature control marked as “TC” in the menu. Long press to make changes (off is default
).
The values available for EGT based gauges are 20,30,40.
Gauge Mode Configuration
There are 4x different display modes available for the EGT and Boost + EGT 52mm Edge series gauges
•
ty1
-
Volts + EGT:
This display mode will show Volts as the numeric readout in the centre of the gauge, and the
outside scale type readout as Exhaust temperature.
•
ty2
-
Boost BAR + EGT:
This display mode will show Boost as the numeric readout in the centre of the gauge in BAR,
and the outside scale type readout will be EGT’s.
•
ty3
-
Boost PSI + EGT:
This display mode will show Boost as the numeric readout in the centre of the gauge in PSI,
and the outside scale type readout will be EGT’s.
•
ty4
-
EGT Only:
This display mode will show EGT as the numeric readout in the centre of the gauge, and the
outside scale type readout will also be EGT’s. This is the display mode is required if only
displaying EGT Data.
•
Note: The Edge 52mm EGT only gauge, is actually the Edge Dual function gauge (just shipped without the Boost sensor).
For EGT only customers you will need to change your display mode to EGT + EGT or Volts + EGT after installing. If at any point you
would like to add a Boost sensor to your EGT gauge to make it Dual function, you can purchase the “7 BAR” boost sensor from u
s
at a later date and simply connect it to the gauge followed by changing your display mode to Boost + EGT.
