10
Step 2 – Installing the EDGE Wi-Fi Setup Utility
1.
Insert the supplied EDGE Wi-Fi Setup Utility CD into your computer’s CD-ROM drive.
2.
Run the
EDGE Wi-Fi Setup Utility Installer.exe
file from the CD and follow the
on-screen instructions to complete the installation. After the installation is complete,
double click on the
EDGE Wi-Fi Setup Utility
icon located on your computer’s
desktop to run the software.
Step 3 – Configuring the EDGE Wi-Fi Setup Utility
1.
Double click on the icon of the photo service you would like to connect your frame to
and select
Login
.
2.
Enter your username and/or pin number for the selected service and click
OK
.
3.
Check the box next to the accounts and/or folders you wish to display and click
OK
.
4.
Repeat 1-3 above until you are finished adding all accounts you wish to display.
Keep the utility running and proceed to Step 4.
Step 4 – Sending Account Information to Your Frame
1.
Connect the digital frame to your computer using the supplied USB cable.
2.
On your digital frame, select the
USB
PC
icon from the Device Selection screen.
Press ENTER to continue. Wait until your computer has finished installing the frame
before proceeding.
3.
Click the
Send
key in the EDGE Wi-Fi Setup Utility to submit your account
information to the frame.
