Edge DB Series, User Manual, Page: 4 / 20

Battery
Battery
Battery
Mounting Guidelines
Power Connections
Low Level Input
High Level Input
Your EDGE amplifier is designed with a swift installation routine in mind.
Please mount the amplifier in a dry location on a solid surface.
NEVER mount the amplifier upside down as this will cause the amplifier to over heat and
will eventually damage the amplifier.
Before fixing the amplifier in place please ensure that there is sufficient air flow around
the exterior of the casing, at least two inches is sufficient to allow effective cooling.
Chassis Ground
Fuse Close To Battery
Remote Turn On Wire
4
NOTE : When using high level input it is not necessary to connect the remote turn on wire.
Do not connect both high level and low level input at the same time.