Always make sure the power switches of your preamplifier, ampli-
fier, and source units are OFF and power indicator light is OFF
before making or disconnecting ANY connections. Never plug in
this unit and any components until all connections are completed.
Step 1
Speaker cables:
There are several options for terminating speaker
cables. We recommend ring terminals because
they minimize the possibility of a short circuit.
Discuss with your dealer which cables and termi -
nation configuration will work best with your
system. Attach your speaker cables to the back
of your amplifier. Be careful not to over tighten
the binding posts. They can be tightened by hand
and usually don’t require special tools.
Step 2
RCA Interconnects:
Connect your RCA interconnect cables from your
preamplifier outputs to the corresponding left/right
RCA inputs on your amplifier.
Step 3
AC Power Cord:
Connect your AC cord to the back of the
preamplifier and plug it into a grounded,
surge-protected outlet.
Some EDGE amplifiers are capable of drawing high amounts of
current. Depending on your loudspeakers and listening prefer-
ences, your AC outlet may not support the demands of your
amplifier, limiting your systems performance. A dedicated high-
current AC line may be of great benefit.
Step 4
Connect the rest of your components according to
the manufactures recommendations
Warning! Never unplug the RCA cables while your unit is on
or immediately after shut off. This could cause damage to
your amplifier.
Setup & Cable Connections
EDGE
+
+
Back NL Amplifier
speaker fuse
speaker fuse
RCA Input Jacks
voltage
selector
AC input
power switch
SERIAL NO.
AC fuses
page 5
page 6
