7
About the Chevy/GM Juice
Thank you for purchasing the Power Edge
Juice
Module for the Chevy/GM
Duramax Diesel®. The
Juice
module has been developed and produced
from the highest quality materials available to ensure the best performance
for years to come. If you have any questions, please contact Edge Products.
We will be very happy to answer your questions about our complete product
line.
The Juice Module is an add-on Engine Control Module (ECM) for the
Duramax® Engine that offers additional features not available with the
factory setup. Since it is an add on ECM, it uses all the factory data, and then
enhances the factory settings to optimize your truck’s performance. These
features include:
•
Engine temperature monitoring and power increase from the Juice module
as engine reaches operating temperature
•
Four selectable power level settings for Normal and Tow/Haul
transmission modes (5 on-the-fly selectable power settings with the
Attitude
)
•
Transmission slip monitoring - If any transmission slip is detected power is
decreased to eliminate transmission slippage
•
Smart power control during torque converter lockup to allow a smooth,
easy torque converter clutch lock-up
The Juice module offers a large power increase over stock throughout the
rpm range, but the power is most noticeable in the midrange rpm’s. This
greatly improves drivability and towing performance. Transmission
downshifting is greatly reduced, especially while passing or towing.
The Juice also regulates power delivery and timing based on engine
temperature. This means that while the engine temperature is below 160° F
no additional fueling or timing is delivered. At 160° F the module begins
delivering fuel at 50% of the calculated additional fuel, and the percentage
increases as the engine temperature increases, until at full engine
temperature (174° F) the Juice delivers 100% of the calculated additional
fuel. At full engine temperature the Juice also starts modifying timing.
