OPERATION SEND MODE
CHARGING
OPERATION RECEIVE MODE
7TH BUILDING, NO.59 CHUANG FU ROAD,XIAO GANG
INDUSTRIAL ZONE, NINGBO 315800, CHINA
Tel +86.574.873.88888 Fax +86.574.876.77777
www.edgeholdings.com
1. Insert the USB charging cable into any standard USB powered port.
2. The red LED stays solid when charging, it is off when the unit is fully charged.
1. Hold the POWER button on until either the Send or Recv LED lights.
2. Press the Mode button to select Send and confirm that the Send LED is on.
3. Plug the 3.5mm cable into the Auxiliary Input jack. The other end of the 3. 5mm cable should
be plugged into the audio output of a full range audio source.
1. Hold the POWER button on until either the Send or Recv LED lights.
2. Press the Mode button to select Recv and confirm that the Recv LED is on.
3. Plug one end of the 3. 5mm cable into the Auxiliary Output jack. The other end of the 3. 5mm
cable should be plugged into the audio input of an audio source or amplifier.
4. In Recv Mode, it might be necessary to press the Bond Control to cycle through available Send
units until a Bond is established.
USB Wire for Charging
AUX Input for Source Unit Connection
(red)
Send Mode Wiring
Receiver Mode Wiring
AUX Output for Amplifier
Connection
(black)
USB Wire for Charging
AUX Output for Amplifier
Connection
(black)
Music Sharing Kits Manual
WMSK-1