WIRING
OPERATION SEND MODE
OPERATION RECEIVE MODE
7TH BUILDING, NO.59 CHUANG FU ROAD,XIAO GANG
INDUSTRIAL ZONE, NINGBO 315800, CHINA
Tel +86.574.873.88888 Fax +86.574.876.77777
www.edgeholdings.com
1. Press and hold the EDGE button to turn it on.
2. Push the Edge button once to select Send mode, until the white LED under Bond button is turned on.
3. In Send mode, push Volume up and Volume down buttons to adjust all bonded receivers' volumes.
External Antenna
Power
(yellow)
Ground
(black)
Remote in
(red)
Remote out
(blue)
Auxiliary Input Female
(red)
Auxiliary Output Female (black)
1. Press and hold the EDGE button to turn it on.
2. Push the Edge button once to select Receiver mode, until the amber or green LED under Bond
button is turned on.
3. In Send mode, push Volume up and Volume down buttons to adjust this single receiver's volume.
4. Bonded button is only active when in Receiver mode. Use this button to select which Send Unit you
are listening to. You can also select and listen to any SKAA transmitter.
Snap-in Music Sharing Kits Manual
MSK-13
