15
TA
BL
E O
F C
ON
TE
NT
S
I
NT
RO
DU
CT
IO
N
O
PE
RA
TIN
G I
NS
TR
UC
TIO
NS
AP
PE
ND
IX
TABLE OF CONTENTS INTRODUCTION
OPERA
TING INSTRUCTIONS APPENDIX
A P P E N D I X
settings. It is necessary to follow the
screen prompts, possibly requiring
several ‘Ignition On’ and ‘Ignition
Off’ sequences.
When recovery is complete your ve-
hicle is at factory stock. You are now
able to start your vehicle normally.
You may now attempt to program your
vehicle again. In the event that recov-
ery is unsuccessful or fails to com-
plete the programming cycle, a status
message will display on the program-
mer.
------------------------------------------
Issue: I left Edge Products
tuning in my vehicle and went
to my dealer for service, now
my Edge Products program-
mer will not work?
Solution:
The dealership likely updated your ve-
hicle’s calibrations, and saved over the
Edge Products tuning. The program-
mer does not recognize the new fi les
in your vehicle.
------------------------------------------
Issue: My programmer works
fi ne on my vehicle, but after I
returned my vehicle to stock
and tried it on another vehi-
cle I own, the screen showed
E-6D “Needs Update – why?
Solution:
The Evo HT programmer is pro-
grammed at our factory with the latest
databases meant to provide broad
vehicle coverage. Your fi rst vehicle’s
calibrations (tuning fi les) were sup-
ported by our database, but your
second vehicle’s calibrations are not.
Update your HT device using your
update software. If an update is not
available,
you will receive an e-mail
as soon as one is.
----------------------------------------------
Issue: My programmer shows
a ‘vehicle calibration not on
fi le’ status.
Solution:
The EVO HT programmer is loaded
with the latest databases meant to
provide extremely broad vehicle cov-
erage. ‘Vehicle calibration not on fi le’
status occurs when a programmer does
not have the necessary calibration fi les
to program a vehicle. Update your
programmer with Edge Products Easy
Update software. If your calibration
is available it will be downloaded to
your programmer for immediate use.
If your calibration is not available,
your calibration will be uploaded to
Edge Products’ R&D for tuning. You
will receive an e-mail as soon as your
calibration is available. Calibrations
are usually available in 5 business
days.
