![Edge Products CTS 2 User Manual Download Page 33](http://html1.mh-extra.com/html/edge-products/cts-2/cts-2_user-manual_2359511033.webp)
STEP 5 -
Select Camera Delay. Adjust the value using the arrows,
then press Enter.
Always drive carefully
confirming the safety of the rear
and surrounding conditions
by looking directly with your
eyes:
Reversing the vehicle by only looking at the screen is
dangerous as it may cause an accident or a collision with an
object. The back-up camera is only a visual assist device
when reversing the vehicle. The images on the screen may
be different from the actual conditions.
Do not use the back-up camera under the following
conditions:
• Icy or snow-covered roads.
• Tire chains or a temporary spare tire is installed.
• The liftgate is not fully closed.
• The vehicle is on a road incline.
Using the back-up camera under the following conditions is
dangerous and could result in injury or vehicle damage or
both:
• When the display is cold, images may course across the camera
or the screen and may be dimmer than usual, which could cause
difficulty in confirming the surrounding conditions of the vehicle.
Always drive carefully confirming the safety of the rear and the
surrounding conditions by looking directly with your eyes.
• Do not apply excessive force to the camera. The camera position
and angle may deviate.
• If water, snow, or mud is stuck on the camera lens, wipe it off using a
soft cloth.
33
Settings
Camera Delay
2.0
ENTER
EXIT
WARNING
CAUTION
Summary of Contents for CTS 2
Page 1: ......