2
MOUNTING BRACKET
C
4
5
ANCHOR
WALL
ELECTRICAL
BOX
3:
Hold the two mounting brackets against the wall above the
electrical box. Using a level, align the mounting brackets
and mark the four bracket holes on the wall.
4:
Tap the anchors onto the marked points into the wall up to
the threaded portion with a hammer.
5:
Screw the threaded portion of the anchors in with the a
Phillips screwdriver.
NOTE:
The Cody 12" canopy mount must be installed right
above the electrical box.
D
LED POWER SUPPLY
WIRE NUT
6
7
ELECTRICAL BOX
8
6:
Connect the white LED power supply wire to the neutral
power wire with a wire nut.
7:
Connect the black LED power supply wire to the hot power
wire with a wire nut.
8:
Place the LED power supply and all wire connections inside
the electrical box.
E
CROSSBAR
ASSEMBLY
#8-32 SCREW
ELECTRICAL BOX
POWER WIRE
9
9
9:
Mount the crossbar assembly to the electrical box holes with
the provided #8-32 screws.
F
#8 SCREW
MOUNTING BRACKET
ELECTRICAL BOX
10:
Line up the mounting bracket holes with the anchors and
secure the fixture to the anchors with the four #8 screws
provided.
ANCHOR
3
3
10
10
