Edge-Core VPS3302, User Manual

Page: 24 / 43

Configuration of C party's VTG3306 (3):
♦
Configure the related parameter of Parking Server in web page. Please refer to 6.1.3
Configuration of Function.
♦
Configure the same prefix number 3100 that is the same as A party's VTG3306 (1)
Web Folder
：
ADVANCED \ PREFIX MAP
♦
If C is connected via PSTN line (as the example 3, 5 above, 6.2.2 Analysis of Example), Call
Forward function is needed to be configured on VTG3306 (3). The phone call will be
forwarded to destination. For detail configuration, please refer to user manual of VES3302
6.2.4 Practice
1. A calls B or B calls A, conversation starts.
2. A press Flash+#, then B is parked to Parking Server and .
3. C's phone is ringing, then C hooks off and talks to A
♦
3100 is the prefix number of C's VTG3306 (3). If you refer to the configuration of
previous graph, dial this number will connect to VTG3306 (3), and its phone number is
88994491449103. "12" will be treated as digits, send to VTG3306(3) when connected.
♦
If VTG3306 uses default extension number, then extension 12 is ringing.
♦
If Call Forward function is configured on C's gateway, then phone call is forwarded to
destination. A party does not need to change dialing behavior.
♦
If both A and C use the same Gateway, then A presses Flash+12+# directly.
4. There are several ways to retrieve.
♦
A hooks on, C is able to talk with B. or
♦
C presses Flash button, and then C is able to talk with B. (In the example 3, 5 above at
chapter 6.2.2, this function is not available, because C is connected via PSTN line. The
Flash signal is filtered by the PBX of telecom company) or
♦
C hooks on, A and B resume to talk. (In the example 3, 5 above at chapter 6.2.2, this
function might not available, because C is connected via PSTN line. Different Telecom
Companies may generate different kinds of busy tone when line is disconnected. It is
possible that gateway is unable to detect it.) or
20