Edge-Core ES3526XA, Installation Manual, Page: 36 / 64

Installing the Switch
3-6
3
Installing an Optional SFP Transceiver
Figure 3-5 Inserting an SFP Transceiver into a slot
The SFP slots support the following optional SFP transceivers:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LH
To install an SFP transceiver, do the following:
1. Consider network and cabling requirements to select an appropriate SFP
transceiver type.
2. Insert the transceiver with the optical connector facing outward and the slot
connector facing down. Note that SFP transceivers are keyed so they can only
be installed in one orientation.
3. Slide the SFP transceiver into the slot until it clicks into place.
Note: SFP transceivers are hot-swappable. The switch does not need to be powered off
before installing or removing a transceiver. However, always first disconnect the
network cable before removing a transceiver.
Note: SFP transceivers are not provided in the switch package.
17
18
19
20
21
22
23
24
D
iag
26
P
W
R
25
26
25
ES3526XA