Edge-Core ES3510MA-DC, Management Manual, Page: 549 / 1098

C
HAPTER
21
| System Management Commands
Event Logging
– 549 –
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#clear log
Console#
R
ELATED
C
OMMANDS
show log (549)
show log
This command displays the log messages stored in local memory.
S
YNTAX
show log { flash | ram }
flash - Event history stored in flash memory (i.e., permanent
memory).
ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆ All log messages are retained in RAM and Flash after a warm restart
(i.e., power is reset through the command interface).
◆ All log messages are retained in Flash and purged from RAM after a
cold restart (i.e., power is turned off and then on through the power
source).
E
XAMPLE
The following example shows the event message stored in RAM.
Console#show log ram
[1] 00:01:30 2001-01-01
"VLAN 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
[0] 00:01:30 2001-01-01
"Unit 1, Port 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
Console#