Edge-Core ES3510MA-DC, Management Manual, Page: 1004 / 1098

C
HAPTER
41
| OAM Commands
– 1004 –
D
EFAULT
S
ETTING
1
C
OMMAND
M
ODE
Interface Configuration
C
OMMAND
U
SAGE
If this feature is enabled, an event notification message is sent if the
threshold is reached or exceeded within the period specified by the efm
oam link-monitor frame window command ( page 1004 ). The Errored Frame
Event TLV includes the number of errored frames detected during the
specified period.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#efm oam link-monitor frame threshold 5
Console(config-if)#
efm oam link-
monitor frame
window
This command sets the monitor period for errored frame link events. Use
the no form to restore the default setting.
S
YNTAX
[ no ] efm oam link-monitor frame window size
size - The period of time in which to check the reporting threshold
for errored frame link events. (Range: 10-65535 units of 10
milliseconds)
D
EFAULT
S
ETTING
10 (units of 100 milliseconds) = 1 second
C
OMMAND
M
ODE
Interface Configuration
C
OMMAND
U
SAGE
If this feature is enabled, an event notification message is sent if the
threshold specified by the efm oam link-monitor frame threshold command
( page 1003 ) is reached or exceeded within the period specified by this
command. The Errored Frame Event TLV includes the number of errored
frames detected during the specified period.
E
XAMPLE
This example set the window size to 5 seconds.
Console(config)#interface ethernet 1/1
Console(config-if)#efm oam link-monitor frame window 50
Console(config-if)#