Quick Installation Guide
ECWO5212-L 11ac dual band IP68 Access Point with external antenna
ENGLISH
3
1
5G LED
5G Wi-Fi status (Blue). The 5G LED will always on when a VAP(SSID) is
enabled, and the 5G LED will blink when there is 5G traffic.
2
2.4G LED
2.4G Wi-Fi status (Blue). The 2.4G LED will always on when a VAP(SSID) is
enabled, and the 2.4G LED will blink when there is 2.4G traffic.
3
Status LED
ECWO5212-L status (Green). The Status LED will start blinking when the
ECWO5212-L is booting. After finishing booting, the Status LED will always
on.
4
Ventilation Valve
Due to extreme weather conditions, water vapor in the ECWO5212-L may
condense. The valve allows ventilation to prevent moisture buildup within the
ECWO5212-L.
5
Wall Mounting Holes
For hanging ECWO5212-L.
6
Pole Mounting Gap
For mounting ECWO5212-L.
7
LAN Port
The ports for connections with LAN side devices.
8
Uplink (PoE) Port
Offers uplink connection. This port can be used to connect to a controller,
gateway, or directly to the Internet. 802.3at PoE is also supported.
9
Restart / Reset Button
Press once to restart the system; hold for more than 5 seconds to reset the
system to factory default settings.
10
SMA connector
The SMA connectors are for 5G antennas.
