Quick Start Guide
– 5 –
From a PC running VT-100 terminal emulator software, use the following settings:
◆
Baud rate — 115,200 bps
◆
Character Size — 8 Characters
◆
Parity — None
◆
Stop bit — One
◆
Data bits — 8
◆
Flow control — none
Log in to the command-line interface (CLI) using default settings:
◆
Login Name — admin
◆
Password —
null
(there is no default password)
7. Connect to the Web
User Interface
The AP offers a user-friendly web-based management interface for the
configuration of all the unit’s features.
You can make initial configuration changes by connecting a PC directly to the AP’s
LAN port. The AP has a default management IP address of 192.168.1.10 and a
subnet mask of 255.255.255.0. You must set your PC IP address to be on the same
subnet as the AP (that is, the PC and AP addresses must both start 192.168.1.x).
Log in to the web interface using the default settings:
◆
Login Name — admin
◆
Password — tallacnetworks
Console Port
Console Cable
1
2
