Edge-Core ECW5212, Management Manual

Page: 20 / 48

Chapter 1
| Introduction
Main Menu
– 20 –
Common Web Page
Buttons
The list below describes common buttons found on most of the web management
pages:
◆
Save – Applies the new parameters and saves them to temporary RAM
memory. Also displays a message at the top of the screen to inform you that the
changes have not yet been saved to Flash memory. The running configuration
will
not be saved upon a reboot unless you click the “Apply” button.
Figure 5: Set Configuration Changes
◆
Apply – Saves the current configuration so that it is retained after a restart.
◆
Revert – Cancels the newly entered settings and restores the originals.
◆
Welcome > Logout – Open the Welcome list and click Logout to end the web
management session.