Edge-Core ECS4660-28F, Management Manual, Page: 940 / 2020

C
HAPTER
24
| System Management Commands
SMTP Alerts
– 940 –
R
ELATED
C
OMMANDS
show logging sendmail (943)
SMTP A
LERTS
These commands configure SMTP event handling, and forwarding of alert
messages to the specified SMTP servers and email recipients.
logging sendmail
This command enables SMTP event handling. Use the no form to disable
this function.
S
YNTAX
[ no ] logging sendmail
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
Console(config)#logging sendmail
Console(config)#
REMOTELOG facility type The facility type for remote logging of syslog messages as
specified in the logging facility command.
REMOTELOG level type The severity threshold for syslog messages sent to a remote
server as specified in the logging trap command.
REMOTELOG
server IP address
The address of syslog servers as specified in the logging host
command.
Table 71: show logging trap - display description (Continued)
Field Description
Table 72: Event Logging Commands
Command Function Mode
logging sendmail Enables SMTP event handling GC
logging sendmail host SMTP servers to receive alert messages GC
logging sendmail level Severity threshold used to trigger alert messages GC
logging sendmail
destination-email
Email recipients of alert messages GC
logging sendmail source-
email
Email address used for “From” field of alert messages GC
show logging sendmail Displays SMTP event handler settings NE, PE