Edge-Core ECS4660-28F, Management Manual, Page: 1627 / 2020

C
HAPTER
48
| DHCP Commands
DHCP Client
– 1627 –
◆
Note that the vendor class identifier can be formatted in either text or
hexadecimal using the ip dhcp client class-id command, but the
format used by both the client and server must be the same.
E
XAMPLE
Console(config)#interface vlan 2
Console(config-if)#ip dhcp client class-id hex 0000e8666572
Console(config-if)#
R
ELATED
C
OMMANDS
ip dhcp restart client (1627)
ip dhcp restart client
This command submits a BOOTP or DHCP client request.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆ This command issues a BOOTP or DHCP client request for any IP
interface that has been set to BOOTP or DHCP mode through the ip
address command.
◆ DHCP requires the server to reassign the client’s last address if
available.
◆ If the BOOTP or DHCP server has been moved to a different domain,
the network portion of the address provided to the client will be based
on this new domain.
E
XAMPLE
In the following example, the device is reassigned the same address.
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#exit
Console#ip dhcp restart client
Console#show ip interface
VLAN 1 is Administrative Up - Link Up
Address is 12-34-12-34-12-34
Index: 1001, MTU: 1500
Address Mode is DHCP
IP Address: 192.168.0.9 Mask: 255.255.255.0
Proxy ARP is disabled
Console#
R
ELATED
C
OMMANDS
ip address (1648)