Edge-Core ECS4120-28F, Reference Manual, Page: 444 / 938

Chapter 13
| Power over Ethernet Commands
– 444 –
Eth 1/ 5 Enabled -- Off 30000 mW 0 mW Low
Eth 1/ 6 Enabled -- Off 30000 mW 0 mW Low
Eth 1/ 7 Enabled -- Off 30000 mW 0 mW Low
Eth 1/ 8 Enabled -- Off 30000 mW 0 mW Low
Eth 1/ 9 Enabled -- Off 30000 mW 0 mW Low
Eth 1/10 Enabled -- Off 30000 mW 0 mW Low
Eth 1/11 Enabled -- Off 30000 mW 0 mW Low
Eth 1/12 Enabled -- Off 30000 mW 0 mW Low
.
.
.
show power inline
time-range
This command displays the time-range and current status for specific ports or for all
ports.
Syntax
show power inline time-range time-range-name [ interface ]
time-range-name - Name of the time range.
(Range: 1-30 characters)
interface
ethernet
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-24/48)
Command Mode
Privileged Exec
Example
Console#show power inline time-range ethernet 1/5
Interface Time Range Name Status
--------- ---------------- --------
Eth 1/ 5 r&d Inactive
Console#
Table 84: show power inline status - display description
Field Description
Admin The power mode set on the port (see power inline )
Time Range Time during which power is supplied
Oper The current operating power status (displays on or off )
Max Power The maximum power allocated to this port (see power inline maximum
allocation )
Used Power The current power consumption on the port in milliwatts
Priority The port’s power priority setting (see power inline priority )