Edge-Core ECS4120-28F, Reference Manual, Page: 441 / 938

Chapter 13
| Power over Ethernet Commands
– 441 –
Example
Console(config)#interface ethernet 1/1
Console(config-if)#power inline
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#no power inline
Console(config-if)#
Related Commands
time-range (168)
power inline
maximum allocation
This command limits the power allocated to specific ports. Use the no form to
restore the default setting.
Syntax
power inline maximum allocation milliwatts
no power inline maximum allocation
milliwatts - The maximum power budget for the port.
(Range: 3000-30000 milliwatts)
Default Setting
30000 milliwatts
Command Mode
Interface Configuration (ECS4120-28P Ethernet ports 1-24)
Command Usage
◆
The total PoE power delivered by all ports cannot exceed the maximum power
budget of 370W. All the RJ-45 ports support both the IEEE 802.3af and IEEE
802.3at standards. The maximum number of ports which can supply power
simultaneously at the specified levels are shown in the following table.
◆
If a device is connected to a switch port and the switch detects that it requires
more than the maximum power allocated to the port or to the overall switch,
no power is supplied to the device (i.e., port power remains off ).
Example
Console(config)#interface ethernet 1/1
Console(config-if)#power inline maximum allocation 8000
Console(config-if)#
Table 83: Maximum Number of Ports Providing Simultaneous Power
Switch 34.2W (802.3at) 15.4W (802.3af) 7.5W (802.3af)
ECS4120-28P 10 24 24