Edge-Core ECS4110-28T, Management Manual, Page: 869 / 1514

C
HAPTER
24
| Authentication Commands
802.1X Port Authentication
– 869 –
E
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x re-authentication
Console(config-if)#
R
ELATED
C
OMMANDS
dot1x timeout re-authperiod (869)
dot1x timeout
quiet-period
This command sets the time that a switch port waits after the maximum
request count (see page 866 ) has been exceeded before attempting to
acquire a new client. Use the no form to reset the default.
S
YNTAX
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
seconds - The number of seconds. (Range: 1-65535)
D
EFAULT
60 seconds
C
OMMAND
M
ODE
Interface Configuration
E
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout quiet-period 350
Console(config-if)#
dot1x timeout
re-authperiod
This command sets the time period after which a connected client must be
re-authenticated. Use the no form of this command to reset the default.
S
YNTAX
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
seconds - The number of seconds. (Range: 1-65535)
D
EFAULT
3600 seconds
C
OMMAND
M
ODE
Interface Configuration