Edge-Core ECS3510-28F, Installation Manual, Page: 44 / 72

C
HAPTER
4
| Making Network Connections
Twisted-Pair Devices
– 44 –
C
ONNECTING TO
PC
S
, H
UBS
,
AND
S
WITCHES
1.
Attach one end of a twisted-pair cable segment to the device’s RJ-45
connector.
Figure 14: Making Twisted-Pair Connections
2.
Attach the other end to an available port on the switch.
Make sure each twisted pair cable does not exceed 100 meters (328 ft) in
length.
3.
As each connection is made, the Link LED (on the switch) corresponding to
each port will light green or amber to indicate that the connection is valid.