Edge-Core ECS2000-50T, Installation Manual, Page: 41 / 67

C
HAPTER
3
| Installing the Switch
Mounting
– 41 –
D
ESKTOP OR
S
HELF
M
OUNTING
1.
Attach the four adhesive feet to the bottom of the first switch.
Figure 12: Attaching the Adhesive Feet
2.
Set the device on a flat surface near an AC power source, making sure there
are at least two inches of space on all sides for proper air flow.
3.
If installing a single switch only, go to “Connecting to a Power Source” on
page 42 .
4.
If installing multiple switches, attach four adhesive feet to each one. Place
each device squarely on top of the one below, in any order.