Quick Installation Guide
ECH502
ENGLISH
⑤
2. Connect the ECH502 to the wired network.
Connect the Eth1/PoE port of the ECH502 to a switch in the existing wired LAN network with an Ethernet
cable.
3. Power on the ECH502.
There are two ways to supply power over to the ECH502.
a) Connect an IEEE 802.3af-compliant PSE device (e.g. a PoE switch) to the Eth1/PoE port of the ECH502
with an Ethernet cable.
b) Connect the 12V/1A power adapter to the DC power jack.
Using a different power adapter may damage this system.
To verify the wired connection between the ECH502 and you switch / router, please also check
the LED indicator of the respective network devices.
4. Connect the ECH502 to the EC-PP200 (voucher printer).
If an operator needs to create an On-Demand guest account and print out the account, the EC-PP200
voucher printer should be physically connected to the ECH502; connect the EC-PP200 to the ECH502 via the
USB cable, as shown in the diagram below.