Edge-Core AS5700-54X, Cli Reference Manual, Page: 443 / 1116

– 443 –
17
Spanning Tree Commands
This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected
interface.
Table 87: Spanning Tree Commands
Command Function Mode
spanning-tree Enables the spanning tree protocol GC
spanning-tree forward-time Configures the spanning tree bridge forward time GC
spanning-tree hello-time Configures the spanning tree bridge hello time GC
spanning-tree max-age Configures the spanning tree bridge maximum age GC
spanning-tree mode Configures STP, RSTP or MSTP mode GC
spanning-tree pathcost
method Configures the path cost method for RSTP/MSTP GC
spanning-tree priority Configures the spanning tree bridge priority GC
spanning-tree mst
configuration Changes to MSTP configuration mode GC
spanning-tree system-bpdu-
flooding Floods BPDUs to all other ports or just to all other ports in
the same VLAN when global spanning tree is disabled GC
spanning-tree transmission-
limit Configures the transmission limit for RSTP/MSTP GC
max-hops Configures the maximum number of hops allowed in the
region before a BPDU is discarded MST
mst priority Configures the priority of a spanning tree instance MST
mst vlan Adds VLANs to a spanning tree instance MST
name Configures the name for the multiple spanning tree MST
revision Configures the revision number for the multiple spanning
tree MST
spanning-tree bpdu-filter Filters BPDUs for edge ports IC
spanning-tree bpdu-guard Shuts down an edge port if it receives a BPDU IC
spanning-tree cost Configures the spanning tree path cost of an interface IC
spanning-tree edge-port Enables fast forwarding for edge ports IC
spanning-tree link-type Configures the link type for RSTP/MSTP IC
spanning-tree mst cost Configures the path cost of an instance in the MST IC
spanning-tree mst port-
priority Configures the priority of an instance in the MST IC