Quick Start Guide
– 2 –
c. Mounting on a Ceiling Without T-Bars
1.
At the installation location on the ceiling, use the mounting bracket to
mark four holes for the plugs and screws (included in the screw kit).
Drill four holes for the plugs, and then insert the plugs and tap them
flush with the ceiling surface.
Use the four screws to secure the bracket to the ceiling (screw torque
must be less than 6 kgf.cm).
2.
Place the AP over the bracket flanges and then slide it onto the
bracket until it snaps into its secured position.
Connect Cables
a. Connect LAN Cables
1.
Connect Category 5e or better cable to the Uplink(PoE) 2.5G RJ-45
port. When connected to a PoE source, the Uplink(PoE) port
connection provides power to the unit.
2.
(Optional) Connect a local LAN switch or computer to the LAN1 or
LAN2 1000BASE-T RJ-45 ports.
b. (Optional) Connect AC Power Adapter
1.
When not connected to a PoE source, connect the AC power adapter
to the DC power jack on the AP and then plug the adapter into a
nearby AC power source.
Check AP LEDs
1.
2.4G and 5G LEDs — on green for radio enabled.
2.
Power/Status LED — on green for normal operation.
Connect to the Web User Interface
1.
Connect a PC directly to the AP’s LAN1 or LAN2 port.
2.
Set the PC IP address to be on the same subnet as the AP LAN port
default IP address. (The PC address must start 192.168.2.x with
subnet mask 255.255.255.0.)
3.
Enter the AP’s default IP address of 192.168.2.1 into the web
browser address bar.
4.
On first-time log in to the web interface, the Setup Wizard starts and
you must set a new password (the default is “admin”).
5.
Continue with the Setup Wizard to set the regulatory country and
management mode before clicking “Done.”
1
2
2
2
1
1
Note:
To connect to the web interface using the Uplink(PoE)
port, the IP address is automatically assigned through DHCP by
default. If a DHCP server is unreachable, the Uplink(PoE) port
reverts to a fallback IP address of 192.168.1.10.
Note:
For more information on the Setup Wizard and AP
configuration, refer to the
User Manual
.
3
2
1
4
