PPS20
–
User Manual Rev. 1.10
EDFelectronics JRMM Sp. z o.o. sp.k.
Rybnicka 64, Radlin 44-310, Poland
; e-mail: [email protected] tel.: +48 604 343 504
39
4.2.7
T
IMER
O
PERATION
PPS20 can run with no limited operation time or according to the required timer
set.
Turn rotary encoder or use arrow buttons
▲
or
▼
to select timer TAB; press
ENTER
button or rotary knob to edit. Press
ENTER
button or rotary knob again
to confirm the settings
–
Fig. 4.2.10
Fig. 4.2.10
To set the unit into no timer operation ( Timer Off ) set all timer values to 0
(0:00:M:s). If timer is set to 0, then HV activation will activate HV output active as
long as HV button is pressed again.
Any other sets will automatically set the unit into the time counter operation
–
count down to 0:00:M:s. Timer will start counting as only high voltage operation
is started (HV On) and will switch the high voltage off when timer will reach 0
(0:00:M:ss).
