VT-50 & VT-50-XLR -
Quickstart Guide - ED-006-007-24
11
LANYARDS
For added security, you can optionally use an Edesix lanyard (AC-LANYARD-05) as a secondary
attachment. The lanyard is a long piece of sturdy polyester ribbon, with a split ring at each end and
a phone strap attached to each split ring.
To attach a VT-50 / VT-50-XLR:
h
Push one of the phone straps through the two
small holes (tether point) in the corner of the
VT-50 / VT-50-XLR.
h
Loop the phone strap round the rest of the
lanyard and pull it tight.
h
Remove the other split ring from the lanyard
entirely.
h
Slide the now-free end of the lanyard onto the
remaining split ring, so the lanyard forms a
circle.
h
Put the lanyard on, and attach the clip on the
back of the VT-50 / VT-50-XLR to your uniform.
This clip can be taken off and rotated so it is
either vertical or horizontal.
h
Your VT-50 / VT-50-XLR is now securely attached
to your uniform.
