Technical Data
Weight without power saw
2,5 kg
Drive capacity
from 1.2 kW
Working width
120 mm
Knife width
30 mm
Number of knives
4 units
Mandril revolution
n max. 13,000 rpm
Engine
V-belt
Areas of Application
The device is apt for planing flat or round wood surfaces of all kinds. For planing round
surfaces, we recommend the EDER round planer. The constructive formation of the planing
barrel causes a high chipping performance at minimal effort. The device is set on the folding
plate supported oscillating around the rotary axis of the barrel. The knives fastened on the
rotating peeling barrel are continuously adjustable, by which radius as well as depth of
cutting can be adjusted to the desired chip thickness. On the rectangular peeling barrel
there are, distributed in 2 levels, 4 knives, which generate a smooth surface at the right
adjustment without vibrations. The device may only be used as intended for the listed
operations.
Mounting the Planer to the Chain Saw
The device can be assembled to ordinary power saws from 1.2 kW. The fitting attached
parts for the saws mentioned in the accompanying documents and bills of delivery are
included in delivery. The planing head carrier is to be assembled instead of the chain rail.
While mounting please look at the spare parts list on last page of this document and
compare the part numbers.
For assembly, the chain rail and chain pinion are removed. The chain pinion is replaced by
the coupling barrel with V-belt pulley (18). The planing head carrier (01) is fastened instead
of the chain rail in connection with the chain wheel cap. Before fastening the chain wheel
cap, the V-belt has to be laid around the pulley. Now, the planing head (02) is slid onto the
planing head carrier (01). The V-belt (08) is laid onto the V-belt pulley (18) of the coupling
barrel. Please tense the v-belt (08) by moving the head (02) and fastening the tightening
screw (07). Please observe that the v-belt pulley (18), the v-belt (08) and the coupling barrel
(05) are straigth in line and parallel to the head carrier (01).
Important: The supply of chain oil must be prevented by shutting down the oil pump
or by emptying the oil tank.
EDER planer EPH1, 01.07.09
- 2 -
