English
- 47 -
step without confirmation, select
No
and proceed by
pressing the
OK
button. You can change this setting
later using the
Settings>Device Preferences>Loca-
tion
menu on the Home Screen.
10. Help improve Android
Automatically send diagnostic information to Google,
like crash reports and usage data from your device
and apps. This information won't be used to identify
you. Select
Yes
to confirm and press
OK
. To skip this
step without confirmation, select
No
and proceed by
pressing the
OK
button. You can change this setting
later using the
Settings>Device Preferences>Usage
& Diagnostics
menu on the Home Screen.
Information on Google services and some features of
your TV will be displayed next. You can turn on person-
al results for Assistant by choosing the related option
when prompted. Press
OK
consecutively to proceed.
11. Password
Depending on the country selection you made in the
earlier steps, you may be asked to define a password
(PIN) at this point. Press
OK
to proceed. The selected
PIN cannot be 0000. This PIN will be required in order
to access some menus, contents or to release locked
channels, sources etc. You will have to enter it if you
are asked to enter a PIN for any menu operation later.
12. Parental controls
Depending on your earlier selections you may be asked
to set your parental control preference in the next step.
You can block programmes according to their age
rating information by selecting one of the related options
or you can turn this function off by selecting the
Off
option. Highlight your selection and press
OK
or
Right
directional button to continue.
13. Select TV Mode
In the following step of the initial setup, you can set
the TV’s operation mode either as
Home
or as
Store
.
Store
option will configure your TV’s settings for store
environment. This option is intended only for store
use. It is recommended to select
Home
for home use.
14. Chromecast built-in always available
Select your chromecast availability preference. If set as
On
your TV will be detected as a Google Cast device
and allow Google Assistant and other services to wake
your TV up to respond to Cast commands, even when
on standby mode and the screen is off.
15. Tuner Mode
Note:
If you don’t want to perform a tuner scan, select one of
the available options anyway. You can skip the scan at some
later stage of the installation wizard. If you skip this step you
can perform a channel search later using the related
Channels
menu options.
The next step is the selection of the tuner mode.
Select your tuner preference to install channels for
Live TV function.
Antenna/Aerial
and
Cable
options
are available. Highlight the option that corresponds to
your environment and press
OK
or
Right
directional
button to proceed.
Antenna/Aerial
If
Antenna/Aerial
option is selected, the TV will search
for digital terrestrial and analogue broadcasts. On the
next screen highlight
Scan
option and press
OK
to
start the search or select
Skip Scan
to continue without
performing a search.
Note:
If the country selected does not have analogue
broadcasts, the analogue search option may not be available.
Cable
If
Cable
option is selected, the TV will search for
digital cable and analogue broadcasts. If any, available
operator options will be listed on the
Select Operator
screen. Otherwise this step will be skipped. You
can select only one operator from the list. Highlight
the desired operator and press
OK
or the
Right
directional button to proceed. On the next screen
select
Scan
option to start a search or select
Skip
Scan
to continue without performing a search. If
Scan
is selected a configuration screen will be displayed
next.
Scan Mode
,
Frequency(KHz)
,
Modulation
,
Symbol Rate(Ksym/s)
,
Network ID
options may need
to be set. To perform a full scan set the
Scan Mode
as
Full/Advance
if available. Depending on the selected
operator and/or
Scan Mode
some options may not be
available to be set.
Note:
If the country selected does not have analogue
broadcasts, the analogue search option may not be available.
Once you are done with setting available options,
press the
Right
directional button to proceed. The TV
will start to search available broadcasts.
While the search continues you can press the
Back/
Return
button twice, highlight
Skip Scan
and press
OK
or
Right
directional button to stop the search. The
channels that have already been found will be stored
in the channel list.
When the initial setup is completed a message will be
displayed. Press
OK
to finish the setup.
You will be asked to give your consent to the
collection of your usage data. Read the text on the
screen for detailed information. Highlight
Accept
and
press
OK
to give your consent and proceed. To skip
without giving your consent, select
Skip
. You can
change this setting later using the
Settings>Device
Preferences>Manufacturer Usage & Diagnostics
menu on the Home Screen.
Home Screen will be displayed. You can press the
Exit
button on the remote or highlight
Live TV
app
and press
OK
to switch to Live TV mode and watch
TV channels.
Summary of Contents for 975936
Page 2: ......
Page 3: ...EDENWOOD EDENWOOD ...
