Edenwood 972468, Manual

Page: 28 / 68

26 EN
USB memory stick Plug in your USB memory stick to play
MP3, WMA, WAV or FLAC files.
USB
TF card or
Micro SD card
Insert your card into the speaker’s TF
slot to play MP3, WMA, WAV or FLAC
files.
TF
Line out Connect the speaker to another
speaker. Use a line out/in cable with a
3.5 mm plug to connect to the speaker,
then insert the other end of the cable
into the AUX IN jack of another speaker.
LINE OUT
NOTE:
• For optimum playback, make sure only compatible audio files (MP3, WMA,
WAV or FLAC) are saved on the USB device or TF card.
• Whenever a USB stick, TF card or Micro SD card has been inserted, any saved
files will automatically begin to play.
Pairing with a Bluetooth (BT) device
To connect this speaker to a Bluetooth device, you must first pair the speaker with the device.
1. Switch on the Bluetooth device (such as your phone or tablet):
• Go to your device’s settings.
• Enable the Bluetooth function.
NOTE: If your Bluetooth device was previously connected to another device, remove
that connection before attempting to connect the device to the speaker. A sound
will play to confirm that the devices have been disconnected.
2. To turn on the speaker, turn the – MASTER VOL + knob clockwise until you hear a click,
and the speaker screen and lights come on. The ON sound will play and bLUE will flash
on the screen. If the speaker is already turned on and/or another mode is active, press
the button to select the BT mode. bLUE will then flash on the screen and the pairing
sound will play. The speaker will automatically enter pairing mode to search for the
Bluetooth device.
3. When the Bluetooth device displays the speaker’s Bluetooth name, edenwood FIRE LIGHT ,
select the name and confirm the pairing process.
4. bLUE will then stop flashing and a sound will play to confirm that the devices have been
paired successfully.
Product usage
B