background image

 

 

 

 

 

Note:

 There may be a trace of smoke or odor when the unit is first operated. 

Do not be alarmed. This indicates a drop of oil fell on the interior coils during 
the manufacturing process. It will quickly evaporate and should not recur. 
 
 

How long is the warranty? 

This heater comes with a ONE-YEAR LIMITED COMPONENT WARRANTY. 

If your unit does not appear to be working properly, please contact our service 

center by calling 1-800-225-6595. Prior to your call, we encourage you to visit 

our service related website www.edenpuresupport.com for troubleshooting tips 

and service instructions if needed.

 

 

 

 

 

                                                    EdenPURE

® 

                    

                                            7800 Whipple Ave. NW                                          

                                             N. Canton, OH 44720                              

                                                     800-225-6595

                                         www.edenpureservice.com

 

                                                                      ©2019 EdenPURE® I-5627 BR11910R-1

    

 

Summary of Contents for A5955

















Reviews: