24
“Beeper Volume”: volume for alarm, higher is louder
“Alarm Sound”: alarm tone
“Temperature Unit
”
: interchange between
℃
and
℉
“Edit Recipe image”: manage recipe picture, add or delete
“Recipe Passcode”: once set up, it will be required to key in before entering into recipe
parameter page
“Appliance Passcode”: it is the password to enter Appliance setting
“Demo Mode”: “yes”, only touch screen is working for demo, no heating function. “no”,
touch screen and heating function both working
“Restore Factory Default”: reset back to factory setting
“Update Firmware”: Upgrade or repair software, restore, backup and renew apps
“Backlight Dim Time” adjust time to dim the screen brightness
“Show recipe detail”: set “NO” to hide parameter setting of recipe during cooking
“Use Expiration”: Set the lease time of the device. When the time is up, user need to enter
the password to enter the working page of the touch screen;
6. Cleaning
6.1 Cleaning instruction
WARNING: MAKE SURE APPIIANCE IS UNPLUGGED
AND COOLDOWN BEFORE CLEANING
6.1.1 Rapid cool down method:
At Stand-by mode, press
device enter rapid cooling process.
Open oven door. When temperature drops to 70
℃
automatically exit
Note!
Do not clean oven during its cooling. The whole process approximately requires 30
minutes.
Warning
: The maximum temperature of this oven can be up to 280
℃
, if not proper
cooling might cause body injuries.
Cleaning purpose
In order to ensure oven’s high efficiency,
Chamber, air filter and oil filter need to
be cleaned every day. Daily cleaning can
make sure it reach hygiene standard and
extend its service time.
Warning: the cooling procedure
must be completed before cleaning to
allow the oven and accessories in the
oven to cool sufficiently, otherwise
scalding may occur.
