edenox ANS-401, Instruction Manual

Page: 7 / 13

6
Model Reference
Power
(W)
Temperature
range ºC
Dimensions
(mm)
Weight
(Kg)
APS-401 8316351 1200 0°C to 8°C 600 x 585 x 1850 69
APS-601 8316401 1400 0°C to 8°C 775 x 650 x 1885 90
APS-201-C 8316311 1000 0°C to 8°C 600 x 585 x 845 44
APS-401-C 8316361 1400 0°C to 8°C 600 x 585 x 1850 69
APS-601-C 8316411 1600 0°C to 8°C 775 x 650 x 1885 90
ANS-401 8336361 2500 -18°C to -2°C 600 x 585 x 1850 74
ANS-601 8336411 2800 -18°C to -2°C 775 x 650 x1885 94
Proceedment
Control Panel
The control panel is located on the front of the appliance.
Turn On
1. Close the door of the cabinet.
2. Connect it to a power supply.
3. Set the temperature as indicated: 0 (Off), 1 (Cool) to 7 (Cold)
Storing Food
To get the best results from your appliance, follow these instructions:
• Only store foodstuffs in the appliance when it has reached the correct operating temperature.
• Do not place uncovered hot food or liquid inside the appliance.
• Wrap or cover food where possible.
• Do not obstruct the fans inside the appliance.
• Avoid opening the doors for prolonged periods of time.
Lock/Unlock the Doors
A lock is fitted to the doors to ensure foodstuffs are kept secure.
Use the keys provided to lock/unlock the door.
Maintenance
• Switch off and disconnect from the power supply before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Clean the door seal with water only.
• Always wipe dry after cleaning.
• Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
• A qualified technician must carry out repairs if required.
Cleaning the cold unit
Periodically cleaning the condenser can extend the life of the appliance.
It is recommended that a qualified technician clean the condenser.
Replace of Lamp
(APS-201C, APS-401-C, APS-601-C)
1) Switch Off and disconnect the appliance from the power supply
2) Remove the plastic cover
3) Twist the lamp in its socket and release
4) Remove the lamp and replace the new one of the same power rating
5) Replace the plastic cover