background image

2

Bass Guitar Amplifier

WT800B

OPERATION MANUAL

Publishing Date 07-15-2005

FOR

E

W

O

RD

Congratulations on the purchase of your new Eden World Tour Integrated
Amplifier System. All of us at Eden are totally committed to providing you
with the very best bass guitar systems in their class. Our goals are to offer
you the outstanding performance quality of a top-notch, professional bass
amplification system at a reasonable price point, and to make World Tour
amplifiers the most musical and reliable Bass amplifiers available.

This manual will cover domestic and international versions of the WT800B
Integrated Amplifier.

The WT800B delivers 300 watts RMS output @ 8 Ohms, 440 watts @ 4
Ohms and 550 watts @ 2 Ohms (per channel). In Bridge Mode, it delivers
880 Watts @ 8 Ohms and 1100 Watts @ 4 Ohms. All modes of operation
have +3dB of headroom. This amplifier also features a thermostatically
controlled, active cooling system with built-in thermal safeties.

You have purchased what we feel is one of the finest bass amplifiers
in the world. The tube pre-amplifier section, with its familiar Eden Enhance
control and powerful 5-way, semi-parametric tone control system is coupled
to a gentle auto-compression circuit, allowing you to achieve a wide array of
sounds. This compact, rack mountable package houses modular circuits
made with superior components and designed for years of trouble-free
service.

The Eden World Tour products group is the result of our quest for ultimate
bass tone and maximum reliability. Your amplifier was designed, engineered
and manufactured equivalent to aircraft vibration standards and housed in a
one-piece aluminum case with steel top to ensure maximum reliability. The
modular design allows quick repair in the field should such a need arise.

Summary of Contents for WT800






















Reviews: