background image

 

Recording Out (D.I.) 

– This fully balanced XLR output allows you to send 

a pre- or post-EQ signal to a recording or sound reinforcement mixing 
console. We use Pin 2 hot configuration. Adjusting the Master Volume 
control will not affect this send. This output is designed to use with phantom 
powered systems. However, it never hurts to turn off the phantom power at 
the board, if possible. 
 

Tuner Out – 

Sends a signal to your tuner. When used in conjunction with 

the Mute function, this allows silent tuning. Vocalists and lead guitarists 
love this feature. It can also be used to provide pre-tone signal to other 
devices such as a direct box or console. The signal is enough to provide 
adequate signal to virtually every tuner on the market. 
 

Mono Pre-EQ Effects Send/Return 

– These standard 1/4-inch jacks allow 

you to send and receive your signal to and from external devices. This 
effects loop is positioned post (behind) the compressor and before the 
Enhance control and the tone section. This loop is at line level; do not use 
instrument level effects in this loop as they tend to be overloaded by the 
higher signal level which can cause distortion. 

 
FOOTSWITCH FEATURES 

 
As previously stated, the footswitch activates two features not available via 
the amplifier itself. We think they both qualify as 

Really Neat Things

 

Mute to Tune

 – Step on this switch to mute everything except the Tuner 

Out. Now you can tune without bothering your singer. Or the audience. 

Neat

, huh? 

 

Enhance Bypass

 – Bypassing the Enhance allows you to create two 

different tones – one with, and one without Enhance. Then, use this switch 
to flip between the two. Even 

Neater

, don’t you think? 

 

ABOUT THE SPEAKERS 
 

Eden is the only bass amplifier manufacturer to design, engineer and build 
its own drivers. Designing and building our own speakers and high-
frequency drivers allows us to create far greater synergy between our drivers 
and cabinets than any other manufacturer can achieve. We can create several 
speaker and/or cabinet prototypes and then test them together to find the best 
possible combination. No other manufacturer has this capability, which is 
why no other manufacturer can equal Eden’s sound and reliability. 

Summary of Contents for Nemesis RS Series Combos





















Reviews: