background image

 
Your system can be damaged by too much or too little amplifier power.  While the 
amount of amplifier power reflects the potential for damage, how that power is 
used (your playing style) is the critical variable.  Too small an amplifier, when 
pushed to its limit, can generate clipping – a signal with enough high frequency 
distortion to burn up a voice coil.  Too large an amplifier, when pushed near its 
limit, can push the speaker beyond its physical limits.  Your playing style 
determines how much headroom (reserve amplifier power needed to handle 
short bursts of sound) you will need.  Slap style playing is particularly demanding, 
as short bursts of low frequency information require a great deal of power to be 
produced accurately without distortion.  You should choose an amplifier that 
delivers adequate power for your playing style without frequent clipping and 
without exceeding the cabinet’s power handling maximum. 
 
Also, keep in mind that simply adding amplifier power will not necessarily 
increase your volume significantly.  The addition of more speakers will have more 
impact on your overall volume level. 
 
CABINET PLACEMENT 
 
The placement of your cabinet can also have an impact on the amount of bass it 
produces.  Placing the unit on the floor and in a corner each increase the amount 
of bass that will be perceived.  This is due to the reinforcement of bass 
frequencies by adjacent surfaces.  The absence of reinforcing surfaces is the 
reason why outside settings are so problematic for bass amplification.  A system 
that may be perfectly adequate in a fairly large club can be rather disappointing 
on an outdoor stage.  If you have plans to perform in such a setting and are not 
confident that the P.A. system can provide you with sufficient reinforcement (both 
out front and via monitors), you should consider using additional equipment to 
support your own sound.   
 
MAINTENANCE 
 
Your Eden speaker system is designed to be trouble-free and to require very little 
maintenance.  You should remember that the weakest links in most systems are 
the solder-less connection points where your plugs and jacks come together.  
These connections are quite vulnerable to contamination and /or corrosion.  Your 
input jacks, as well as your speaker cable plugs, should be periodically cleaned 
using a cotton swab with a solvent such as denatured alcohol.  On cabinets 
equipped with casters, you should check to make sure that the screws the hold 
the caster sockets in place are tight.   
 
 
 
 
 
CLIMATE AND TRANSPORTATION 
 

Reviews: