EDELRID FLEX LITE, Manual

Page: 17 / 30

Declaration of Conformity:
EDELRID GmbH & Co. KG herewith declares that the
article is in conformity with the applicable pertinent
requirements and regulations of the EU Directive
89/686 applicable until 20 April 2018 and of the EU
Regulation 2016/425 applicable as off 21 April 2018.
The original declaration of conformity may be
downloaded from the following website:
http://www.edelrid.de/...
Remarks
Instructions for use: CE XXXX: Notified body responsible
for issuing of the EC Type Approval Certificate of the
product.
Our products are manufactured with the utmost care.
However, should any of our products give cause for a
justified complaint, please advise us of the lot number.
We reserve the right to make technical amendments.
ANSI additional information
- The Instructions for Use must be provided to the user
of this equipment.
- The Instructions for Use for each item of equipment
used in conjunction with this product must be followed.
- Rescue plan: You must have a rescue plan and the
means to rapidly implement it in case of difficulties
encountered while using this equipment.
- WARNING: when using multiple items of equipment, a
dangerous situation can arise in which the safety function
of an item of equipment can be af-fected by the safety
function of another item of equipment.
- WARNING: chemicals, heat, corrosion and ultravio-let
light can damage your harness. Contact Edelrid if there is
any doubt about the condition of this product.
- Be vigilant when working near sources of
electricity, moving machinery or abrasive or sharp
surfaces.
Appendix A – ANSI/ ASSE Z359.11
ANSI/ASSE Z359 Requirements for proper use and
maintenance of full body harnesses
Note: these are general requirements and
information provided by ANSI/ASSE Z359; The
manufacturer of this equipment may impose more
stringent restrictions on the use of the products they
manufacture, see the manufacturer’s instructions.
1. It is essential that the users of this type of
equipment receive proper training and instruction,
including detailed procedures for the safe use of
such equipment in their work application. ANSI/
ASSE Z359.2, minimum requirements for a
managed fall protection program, establishes
guidelines and requirements for an employer’s
managed fall protection program, including policies,
duties and training, fall protection procedures,
eliminating and controlling fall hazards, rescue
procedures, incident investigations and evaluating
program effectiveness.
2. Correct fit of a full body harness is essential to
proper performance. Users must be trained to select
the size and maintain the fit of their full body
harness.
3. Users must follow manufacturer’s instructions for
proper fit and sizing, paying particular attention to
ensure that buckles are connected and aligned
correctly, leg straps and shoulder straps are kept
snug at all times, chest straps are located in the
middle chest area, and leg straps are positioned and
snug to avoid contact with the genitalia should a fall
occur.