Catalog # 60219 - #60399
Rev. 3/09 - AJ/mc
Page 3 of 3
©2009 Edelbrock Corporation
Brochure #63-0009
SPECIFICATIONS
Head Bolt Torque:
7/16" bolts - 70/80 ft./lbs. (short/long
bolts)1/2" bolts - 100/110 ft./lbs.
(short/long bolts)
Intake Bolt Torque:
16-18 ft./lbs.
Rocker Studs:
3/8" (#6022, 6025, 6032, 6035)
Rocker Stud Torque:
45 ft./lbs. (7/16"-14; #6022-#6035)
Rocker Pedestal Bolt Torque:
18-20 ft./lbs. (5/16"-18; #6036-39)
Combustion Chamber Volume:
58-60cc
Intake Port Volume:
170cc
Exhaust Port Volume:
60cc
Deck Thickness:
5/8"
Valve Seats:
Hardened, interlocking ductile iron,
compatible with unleaded fuels
Valve Size:
#60259, #60359 & #60399:
Intake - 2.02", Exhaust - 1.60"
#60229, #60329 & #60379:
Intake - 1.90", Exhaust - 1.60"
Valve Locks:
11/32" x 7° (#9611)
Valve Spring Retainers:
7° 4140 steel (#9724)
Valve Spring Diameter:
1.45"
Valve Spring Installed Height:
1.800"
Valve Spring Seat Pressure:
110-120 lbs.
Max. Valve Lift:
.575"
Pushrod Guideplates:
5/16" Hardened steel (#6022, #6025,
#6032 & #6035 only)
Rocker Arms:
#6022, #6025, #6032, & #6035 accept
stock (except rail style) or aftermarket
roller type#6037, & #6039 accept stock
5.0/5.8L or aftermarket pedestal bolt
down style
Pushrods:
#6022, #6025, #6032, #6035 require
5/16" hardened pushrods for use with
guideplates#6037 & #6039 use stock
pushrods
Spark Plugs:
14mm x ¾" reach gasketed seat
Recommended Intake Gasket:
Fel-Pro #1250
Recommended Exhaust Gasket:
Fel-Pro #1415
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 800-416-8628 • Office: 310-781-2222
Figure 2 - Steam Hole Locations for Early 289 & 302 Engine Blocks
Figure 1 - Head Bolt Tightening Sequence
9
5
1
3
7
10
6
2
4
8
#5 Cylinder
Front Cylinder
LH Bank
(Driver Side)
#1 Cylinder
Front Cylinder
RH Bank
(Pass. Side)
1/8” Holes Drilled
into the Water Jacket.
Position Hole Location
Using the Head Gasket.
•
Edelbrock offers cylinder heads machined to the proper
specifications for use with Fel-Pro Locwire head gaskets only
as shown in the table to the right:
Standard Head #
Machined for Locwire Head Gaskets
60259
60269
60359
60279
60379
60289
60399
60299
