Catalog #s 67112, 67113, 67152, 67153
©2006 Edelbrock Corporation
Page 1 of 2
Brochure #63-67112
Rev. 5/06 - DA/mc
®
TUBULAR EXHAUST SYSTEM
Vehicle Applications: See Below
Catalog #67112, #67113
#67152, #67153
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new
Tubular Exhaust System (TES). If you have any questions, please
contact our
Technical Hotline at : 1-800-416-8628
from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at
. Please fill out and mail your warranty card.
TUBULAR EXHAUST SYSTEM:
These components are designed as a system to improve the exhaust efficiency of the GM C.P.I.
(Central Port Injection) 4.3L V6 engine. A performance gain can be expected by the installation of the system. This system requires
no welding for installation and retains all O.E.M. emissions equipment.
APPLICATIONS:
Catalog #s 67112 / 67113
- 1996-1997 Chevy/GMC S-10/S-15 Pick-up, 4.3L V6, 2 W.D., Standard Transmission
Catalog #s 67152 / 67153
- 1998 Chevy/GMC S-10/S-15 Pick-up, 4.3L V6, 2 W.D., Standard & Automatic Transmissions
Suggested Tools Needed for Installation:
This vehicle has some metric fasteners.
❑
3/8” ratchet socket set with extensions and sockets
❑
Combination set of open-end wrenches
❑
Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑
Liquid penetrant (GM #1052627), anti-seize compound (GM #5613695)
SPECIAL NOTICE:
This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the California Air
Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment certification, we
have included a silver fan shroud decal to help testing personnel verify the this part is a legal replacement on the vehicle for which
it is cataloged. The adhesive-backed decal should be affixed next to the existing emission and engine specifications decal. Do not
cover any part of your original emission decal.
WARNING:
The use of "Thermal Wrap" or any aftermarket coating process
will void the warranty
on your Edelbrock Tubular
Exhaust Systems. Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the system.
NOTE:
High temperature spark plug wires and boots are recommended to withstand heat from T.E.S.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in
poor performance and engine or vehicle damage.
Qty.
PN
Description
❑
1
25-9447
Header left side (#67112 & #67152)
❑
1
25-9446
Header right side (#67112 & #67152)
❑
1
25-9123
Header left side (#67113 & # 67153)
❑
1
25-9078
Header right side (#67113 & # 67153)
❑
1
25-9648
Y-Pipe assembly (#67152 & #67153)
❑
1
25-9659
Y-Pipe assembly (#67112 & #67113)
❑
1
25-9647
Extension pipe left side
❑
2
-
Manifold port gaskets
❑
2
-
Donut connector gaskets
Qty.
PN
Description
❑
1
-
Catalytic converter flange gasket
❑
1
-
2-1/4” U-Muffler clamp
❑
11
-
3/8”-16 x 1” Hex header bolts
❑
4
-
3/8”-16 x 2” Hex bolts
❑
8
-
3/8” Flat washers
❑
16
-
3/8” Lock washers
❑
1
-
3/8” Ferry bolt
❑
1
-
5/8” Spacer, 1-1/2” long
❑
2
52-8097
O2 Sensor plugs
KIT CONTENTS
Catalog #67112 (Ceramic-Coated), #67113 (Ti-Tech Coated)
Catalog #67152 (Ceramic-Coated), #67153 (Ti-Tech Coated)
