Dont forget to check your work with a level as you go!
All images are for illustration only, Please see individual item listings for actual item specifications
Dont forget to check your work with a level as you go!
Page 4 of 5
www.eDecks.co.uk
All images are for illustration only, Please see individual item listings for actual item specifications
Modern Deck Fitting Instructions
www.planyourdeck.co.uk
Fixing the handrail
Slide the connectors over the ends of the handrail
(you will only be able to put this on one way) take two
RIIWKHVLOYHUVHOIWDSSLQJVFUHZVDQGVHFXUHO\À[WKH
connector to the handrail. Do this to both ends
See
Fig 9
Once you have both connectors
attached to your hand rail place
your handrail loosely over the
glass panels, mark the holes of
the handrail connectors on the
newel post.
Remove the handrail of the
glass panels
Pilot drill the holes into the metal
newel post using a 3mm metal
drill piece, repeat this procedure on both newel posts.
Fixing the handrail to the
newel post
We advise that you take care when you doing this
next bit we would advise you have some help.
We again advise you put some warm soapy water
around the rubber bit and we suggest placing the
rubber piece over the glass pieces and then sliding
the whole handrail carefully over the glass pieces
and allow it to ease into place.
Take the two screws that are coloured these will
attach the hailrail to the newel post, line up your
baserail to the holes that you have already made and
VHFXUHO\À[WKHEDVHUDLOWRWKHQHZHOSRVW
See
Fig 10
Once you have all your glass in place it should look
like this. See
Fig 8
Fig 8
Fig 9
Fig 10