Eddylight EDD-GL-BFLAT9, Manual

Page: 3 / 11

, To avoid unnecessary wear and to improve the unifs lifespan, unplug the unit when not in use for extended periods
of time.
• Assembly and installation of the device must be carried out by a specialist familiar with the hazards and the relevant
regulations. Maintenance, operation and commissioning of this device must only be carried out by qualified persons.
• When choosing a location for your device, make sure to avoid impact, vibration, dust, hot and cold temperatures and
dampness. Furthermore, no powerful transformers or motors must be used close to the device.
• The effect light must only be operated at a maximum ambient temperature of 40 °C.
• Never cover the device. Make sure when mounting with other equipment that there is sufficient ventilation. Maintain
a sufficient distance to other devices and walls. Never in stall the effect light in direct proximity of heat sources. Do not
point any strong spot lights or light sources towards the device. This may cause overheating (danger of fire!).
• Do not drill or screw additional screws into the casing in order to fasten the device. This may expose dangerous
voltage to touch.
• The device must be mounted out of normal reach.
• Illuminated objects must be at least 0.5 m away from the device's light emission source. Easily flammable materials
such as decorative fabrics must also have a distance of at least 0.5 m to the device. Otherwise, such objects may
catch fire!
• When mounting the product, make sure that the power cord is neither jammed nor damaged by sharp edges.-
During installation or service work, the area below the place of installation must be cordoned off.
• The installation surface or mounting fixture needs to be designed in a way that it can take 10 times its load capacity
for at least 1 hour without permanent damaging deformation.
• It is also essential that the device is secured by means of a second safety restraint that is independent of the actual
mounting supports when installing it in an elevated position. No part of the installation must fall down if the main
suspension system fails.
• Observe all relevant regulations of your country when installing the device. Acceptance test (in case of
industrial/public use):
• Before first use and after any significant modifications, the installation (including the electrical connections) must be
inspected by an official expert.
• A yearly inspection by an expert is required.
• At least every 4 years, an acceptance test must be carried out by an expert.
• If you want to mount the device on a suitable traverse system, attach the effect light with the mounting bracket and
a suitable traverse clamp that is available separately.