Eddylight DS-1404A, User Manual

Page: 2 / 17

2
1. Introduction
Thank you for purchasing our GOBO LED light. Please read these
instructions carefully before operating to avoid any possible damage and
accidents caused by misuse.
The GOBO LED light has a hydrodynamic aluminum shell. One 10W white
LED is used to create a bright light output. It draws low power and is low
weight.
Packing List
- LED GOBO Light
- User manual
- Power cord
2. Safety Information
- Please consult skilled service technicians for any repairs required
- Always disconnect from the power source before setting up, moving and
servicing
- Avoid direct eye contact to the light when in operation
- Make sure the power supply voltage is compatible with this light
- Before installation, please check the light’s fasteners and mechanical
structure is in good condition and not damaged
- The light is designed for indoor use, below 40 degrees celsius
- The fixture may be mounted in any position provided there is adequate
room for ventilation. Make sure there are no flammable and explosive
items within 0.5 meters.
- Please ensure the ground is always connected