10 | www.tscndt.com
The operator can toggle the replay speed using
F1
and
F2
function buttons, Pause the replay using
F3
and stop the replay with
F4
.
The replay will continuously loop until stopped by the operator.
Camera
The camera function allows the operator to take photos of the inspection piece to be included in
the report or imported separately.
Figure 12
Camera
Pictures can be taken using the
F4
button “
Take Picture
” or the
T
button. The number of shots taken
is displayed on the right hand side of the screen. The shots taken are always associated with the
current scan page in the data screen. After data backup the raw pictures can be found in the scan
page folder.
Data Analysis
Summary of Contents for TSC PACE
Page 1: ...TSC PACE Getting Started with...
Page 23: ...21...
