Eddyfi Technologies M2M MANTIS, Technical Documentation Manual, Page: 10 / 27

10
Connector Signal Description 3/3
4. ENCODER CONNECTOR
Signal Name Description User matching signal
Synchro2
Synchro2 Input/Output
TTL 5V
- If configured as OUTPUT (see in Capture software as below,
Type ≠ “1-axis eincrement”)
-
TTL 5V
- = PRF = 5V/100ns pulse generated with each Pulser signal (IPEX
connector).
-
Signal can be used to synchronize an external system
- Jitter = 10ns.
-
Absolute Max output c/-50 mA
-
If configured as INPUT (see in Capture software as below,
Type = “1-axis eincrement”)
- TTL 5V, active on High level
-
Max Input current 50µA
-
When connected to Phased Array Wheel probe, Synchro2 is used as
« Pause/Resume » to toggle Pause/Resume.
100 KΩ