6
SPECIFICATIONS
SET topology
CineMag output transformers with
tertiary winding
Vacuum tube rectified passive CLCLC
power supply
Hand wired point to point signal
circuit
100K high Alps blue Velvet volume
control
Two input selector switch, one pair
XLR Balanced inputs, one pair RCA
unbalanced inputs
Balanced headphone drive
One pair Neutrik Speakon speaker
outputs
Speaker kill switch
4-foot detachable umbilical cord
Will drive 8 ohm speakers to 4 watts.
Input sensitivity 1.5V for full power
Recommended headphone load 8
ohms or higher
Power bandwidth -1dB 10Hz-25kHz
o
Power into 32 ohms 2W
o
Power into 100 ohms 800mW
o
Power into 300 ohms 400mW
Typical headphone frequency
response -1dB 15Hz-30kHz
Balanced line output 11 volts into
600 ohms. -1dB 15Hz-30kHz
Unbalanced output 0.5V for 3.25V
output -1dB 12Hz-35kHz
Dimensions: 12” wide by 16.5” deep
front control knob, to rear panel
switches. 10” high W/O tubes
Weight: 16 lbs
Headphone/ Speaker Vacuum Tube Amplifier For another copy of this manual contact:
Eddie Current at [email protected]
Eddie Current, LLC
23658 Clover Trail
Calabasas, CA 91032
(818) 651-2734
www.eddiecurrent.com
